Monday, 24 June 2013

One last dance with Croatia


A few weeks have past since our last destination blog post from Vis and the Pakleni Islands off Hvar. Given we have now bid farewell to our beloved Croatia – who graciously introduced our family to the nomadic cruising lifestyle, we’ve flirted with Montenegro (post to follow) and as I write we are in the midst of our first overnight (24 hour, 200km +) passage down to customs entry port Gouvia, Corfu in Greece’s Ionian Islands. So as not to fall too far behind, here are some highlights from our last two weeks in the larger southern Dalmatian islands and coast!

Having met only a handful of Australians in our first two and half months, either the early summer season was finally priming, or the preference for Croatia’s southern islands as a touring ground for our fellow countrymen – but the Aussie floodgates opened once we hit Korcula. Whether it be sharing a bay with another long-way-from-home Aussie-flagged yacht (who’s residents would often row over for a friendly hello) or one of the dozens of old wooden gulets, come week-long live aboard cruises, with music blaring, packed with bikinis and bare chested guys (frequently swearing loudly in a familiar accent) and bomb diving off the highest decks. Mike and I know these wooden gulet boat trips all too well, given this was our tour of choice to explore Croatia back in summer 2006. And our partying actions, despite what felt like a complete disregard for the culture and country at the time, like many twenty-something Aussies who’ve trod the same well-worn path, it was a roaring good time. Korcula Town is another scenic, walled and densely populated peninsular – a pretty locale to stop a few nights.







































Polace at Mljet National Park provided a protected two-night anchorage during some blustery weather and a pleasant sightseeing day around Mljet’s two aqua blue lakes, island monastery and cool, fragrant pine forests. When your legs are regularly cooped up in a small living space, any opportunity for a substantial stretch of the legs is most welcomed.





























 

Inching closer to Dubrovnik and the southern end of the long coastline, we’d been recommended to visit (yet another!) historic walled old town – particularly to taste the famous product from its never-ending rows of oyster and mussel farms. With strong northlies on the nose, we decided against navigating up the shallow channel and instead anchored in nearby Slano bay and took the local bus to Ston. A lesser-known township off the tourist trail and yet only 45 minutes north of Dubrovnik – Ston is not just any walled old town. Incredibly has the second longest remaining fortified wall in the world at 5.5 km (behind China’s goliath Great Wall). After a hike up and around part of the town’s walls for some awesome views, we devoured four dozen fresh Ston oysters between us, washed down with several glasses of cold Karlovacko. Tasty!


















Dubrovnik needs little introduction – as Croatia’s tourism crown jewel and one of Europe’s most popular destinations. The fortified old town hugs a rocky coast, with a painstakingly rebuilt sea of red tiled rooftops (the town was violently shelled during the civil war just two decades ago) – and is one of the most photographed scenes in the Mediterranean. Dubrovnik’s old town is striking and well worth a visit even if just to circumnavigate the old walls and fill up your camera memory card with postcard perfect pictures. Having visited Dubrovnik before, I’d honestly have to say sadly this is one special place where mass tourism and the cruise ship trade is suffocating the charm and magic as daily they disgorge thousands upon thousands of tourists shoulder to shoulder into the humid, enclosed old town. We counted four new cruise ships arrive and depart each day that we were there. 

I’ve read that there is talk of limiting the number of people permitted into the old town each day, as it is clearly obvious the enjoyable capacity has been surpassed. Perhaps it was just a shock after the early season freedoms and space we’ve relished to date. But if and when you are to visit this photogenic destination – we suggest it’s best to leave your wall walk and alleyway roaming until late afternoon or early evening once the hoards have returned to their floating hotels for their pre-paid dinner onboard.


















 
  


































Not an area that’s favourable for yachts – we sat anchored in Dubrovnik’s Gruz harbour for five hours (and were just about to take the tender to shore) when at 6:00 pm the harbourmaster finally decided to advise us that anchoring there was forbidden. As the official ACI marina was full with charter yacht handovers, we were left with little choice but to moor at a private sailing club marina nearby. The next day we were gouged 100% extra for a catamaran (every other mooring has never been more than a 50% surplus). At A$220 for one night to tie up to a slab of cement, laid moorings and plug in power, it was by far the most we’d paid in our three-month cruise up and down the coast. As I’m sure you can understand, when you are trying to make your money stretch over nine months and you already have to supply your own bed, bathroom and kitchen sink, regular hits like this do not make for a sustainable budget!

What we wished we’d known at the time and will happily recommend to other yachties heading north to Croatia – a perfect alternative is the picturesque seaside village of Cavtat just fifteen kilometers south, with regular taxi boat and bus services up to Dubrovnik. For our last two days in Croatia we enjoyed some blissfully calm weather here in a free anchorage (we do love free!), just around the corner from our selected customs clearance port. Whilst our Dubrovnik crowds and overpriced mooring experience had left us slightly bothered and disheartened, in Cavtat we topped up on our relaxed Croatian good vibes and uncrowded vistas to depart back on a high note. We also ended our stay with a much-anticipated visit from the bronzed lovebird newlyweds Bek and Joel who’d also been soaking up the sun and fun of this friendly country! After plenty of laughs, swims and wedding story catch-up over beers, we very much look forward to welcoming them back onboard soon in Greece! 


































































 
Well what more can we say? Early March we arrived to bitter winter’s-end bora winds where even snowflakes made a brief appearance; we now depart in the midst of a Mediterranean heat wave. Arriving well before the seasonal crowds provided us with many glimpses of how the locals live and communities tick for the other half of the year. Croatia’s 1,200+ islands and islets have gifted not only a visual smorgasboard around every corner, but have provided time for plenty of learnings and lessons about the boat, local weather characteristics and Mediterranean sailing etiquette (or lack thereof), all whilst learning to live closely together and accommodate each others strengths and weaknesses. And as the initial set up, maintenance and modification period for the boat – there have been several deadlines and itinerary constraints to work around. This has made for some challenging moments and other times when patience has been essential.  But all part of the adventure!

We’ve simply loved every minute of our cruising visit of Croatia and hope we’ve inspired a few to add this deserving country to their travel destination wish list. Its rich diversity of landscapes, crystal clear bays, unassuming old towns, mind-blogging history (from ancient to the very recent) and friendly, welcoming locals will be long treasured. Though it’s time to move on and we are also very excited to be changing the local courtesy flag for some new colours – to see what wonderful surprises, adventures, characters, mishaps and memories the next few months have in store. We hope that you’ll stay with us on this journey! To conclude, here are a couple of favourite images again from our time in Croatia (along with a splash from Venice).

Do vidjenja Croatia! 





























































































 

Tuesday, 18 June 2013

Tech Update: from Col







After receiving a number of very complimentary comments to our blog, several questions of a technical nature keep arising but have remained unanswered, so time to fill in some gaps!

Firstly, and reinforcing an early comment made by Brooke in our blog that boats are just holes in the ocean you throw money into, I note there has been significant start-up expenditure, but it was pretty much all anticipated given our plans to carry a trike aircraft on the stern and to add solar power. Also to make changes to the boat that better suit an almost permanent live aboard home, as opposed to her previous, original owners who left it at a permanent berth in Croatia to drive back and forth from their home in Germany to enjoy their Lagoon 440 just as we are doing now, but for significantly shorter periods. I had plans to run an excel spread sheet recording expenditure but soon had to ask “why”? The monies had to be spent, the workmanship here is excellent and at costs about half of what we would have paid at home for dare I say, possibly inferior work. Every penny of expenditure should be an asset to your boat and unless it is mindless bling (which we see a lot of here on  European owned boats), it’s a long term investment in comfort, safety and re-sale attractiveness. 

So, the trike first. Our Australian designed and factory built Airborne XT-582 Outback trike, complete with its twin floats required a new, specialised lifting arrangement and the dinghy had to find a new home on one of the two bow trampolines. Combined with the pivoting frame for the 3 X 250W solar panels designed by fellow Australian Lagoon 440 owner Frank Maunders, the trike lifting bar was fabricated in Zagreb by our new mate Vlad. My original lifting bar design didn’t have a sufficient margin of strength so drawings were made for Revision A to the design and the second version is a significant improvement. It also has the bonus that if and when we sell our boat and the trike very likely goes, it becomes a great dinghy lifting rig. The original after-market cover for the trike did a great job, but was never designed to cop salt spray, so both the trike and the wing have new, fully water-proof covers. Getting insurance for the trike is virtually impossible but letting it deteriorate due to lack of protection and maintenance could have catastrophic results, apart from being just dumb. We use a home designed spinnaker-pole type arrangement to lift the dinghy onto the bow and into the water; and although a two person job, it is a safe, swift and physically effortless exercise.















Machinery. Our two Volvo Penta D-55 diesel engines are great units and have proven to be ever reliable, but we can’t say as much for Croatian supplied diesel! Despite having primary and secondary filters, we have experienced intermittent rev fluctuation issues on both engines, strongly suggesting a fuel cleanliness issue. We carry adequate spares and apart from treating the tanks with bug killer, not much we can do. During the wintering period in Turkey, we’ll remove and clean both main tanks and start afresh. The 11kVa Onan/ Perkins generator is also extremely reliable and is more than adequate for our needs. With the recent addition of solar panels and an Outback Flexmax 80A solar regulator, the generator is only needed to run the Bauer dive compressor and the 140lph water maker. Our house batteries and Victron 12V/220V inverter handles all other 220V needs.

Boat modifications/ improvements.  As mentioned earlier, “finally my darling” should, for at least the next 3-4 years, be our floating home for 9 months of each year. To that end, some mods have been made to better utilise the adequate but not necessarily well utilised space on almost every Lagoon. Some of our modifications have included:

  • Double floor storage space added in the generator compartment. Most used tools on top, important but less frequently used tools and spares below. Removable 10mm marine ply panels wood stained and varnished, of course!
  • Total removal of the dishwasher under the sink. It had hardly been used in the six year life of the boat and took up valuable space. One tall and two medium shelves installed in its place, so heaps of room now for pots, pans, pressure cooker and vegetable/fruit juicer.
  • A shelf in the owner’s suite area above the existing desk for a printer/copier/scanner that came in our shipping container from Australia with the trike.
  • Removal of a number of shelves in one tall cupboard to provide additional hanging space. Where does all the beautifully polished Lagoon shelving go you may ask? It becomes those other shelves like where the dishwasher once lived!
  • Conversion of the starboard forward crew cabin into a combined sail, fender and rope locker. Again borrowing from Frank Maunders' earlier designs, we had Vlad in Zagreb make up rope hanging rails that are reachable simply by lifting the large access hatch to the locker, leaving lots of room for our large Jennaker and about twelve fenders.
  • Improvements to layout in the area forward of the mast that normally houses the water maker and pair of 300L water tanks. Along with replacement of the water distribution manifold system, both the fresh water and deck wash pumps have been relocated and floor panels added sitting on powder coated aluminum bearers. Not only has greater use of the space been created, the poorly designed Lagoon system that had the potential for both water tanks to empty if a line between them or elsewhere in the system failed, each tank can be individually isolated.
  • Installation of a magnificent stainless steel marine BBQ and covers made for both the BBQ and our new rescue life-buoy. 











General repairs and Maintenance.
  • The Lagoon bimini above the helm was prone to damage on the upper central cross support, where the boom could rub the bimini sunbrella covering. While this area was being repaired, two clear viewing windows (with roll-over covers) were added in the bimini roof to monitor the main sail when the bimini is up. In case you are wondering, the main sail works well with the boom slightly raised, but the bimini has to be lowered to get best sail performance, particularly on a reach.
  • Repairs to the sail bag which was starting to show its age and needed several straps and clips replaced, as well as replacing the full length zipper with a sturdier variety zip.
  • Replacement of the heater element in our stainless steel 60L water heater, inconveniently located under the master bedroom! The water heater works fine from the starboard engine heat exchanger and while on shore power, but tripped the main circuit breaker when on the generator. A sure sign the element had gone down to earth and we probably got one year out of the element than is normally expected of them.
  • General plumbing repairs and maintenance, particularly in the area of black water holding, pumping and associated pipelines that, if left unattended, can slowly block, non-return valves sticking and other unmentionable occurrences arise that simply cannot be put on the proverbial back-burner!

  • Not to forget replacing the lacing on both of our large trampolines after Mike had a scary experience which might have seen him disappear into the drink through the starboard trampoline when the lacing lines snapped when he jumped across from one net to the other. Hidden from normal view under the small fixed posts that the edge of the net is fixed to, the lacing cord had rotted over time and decided Mike's weight was enough to make them fail. While only one snapped, investigation showed that the lacing on both nets were overdue for replacement.




   

Some Blood. Very recently, I was preparing to install a modified control panel for the water maker and to complete the installation, I needed to drill 2 X 5mm holes through an existing 4mm stainless steel angle iron frame to tap 6mm holes for the securing bolts. I was using a brand new drill bit and my Ryobi battery drill and was exerting significant pressure when the drill bit snapped and the full weight of my body propelled the broken drill bit about 12mm into the fleshy part of my left hand (the part you’d strike if doing a karate chop). My forehead also struck the dive compressor above the water maker leaving a nice egg-like bump. Blood flowed profusely from the ragged, circular puncture wound, so with my other hand stemming the flow, I extracted myself from the small compartment and headed aft for some first aid. Not having had an experience like it before, Brooke and Mike both grabbed the first aid kit but in the meantime, dear old dad did a neat fainting trick and folded, almost head first to the teak deck. When I recovered, I gave instructions regarding elevating my feet and with the claret now contained, we continued towards our next stopover at beautiful Korcula Town. The puncture wound has healed nicely with what was only a light bruise across the palm of my hand and a bit of steadily decreasing swelling and mild discomfort to show for what turned out to be a great training exercise.

The incident, albeit fairly mild, highlighted some gaps in our on-board training and we sat after dinner that night to discuss the incident and develop a plan to fill the gaps. Our plan includes:
  • Going back to my work environment basics and doing at least a mini “SLAM” Stop, Look, Assess and Manage before starting a job. 
  • Modifying our first aid kit into three separate kits: Kit No.1 Major Trauma. Kit No.2 Skin off, scuffs and/or abrasions. Kit No.3 Headache, minor splinters, etc. 
  • We’ll also move to expand the crew’s vessel handling abilities as the incident highlighted the issue of one person having most of the seamanship and vessel handling abilities, and that person is the one that gets injured or accidentally goes overboard. 
  • Remembering how vulnerable and exposed we are in the event an accident occurs on board. To overcome this, we'll ensure we continue to be current in First Aid and resuscitation skills. That will mean attending refresher courses while back at home before rejoining the boat next year.

For those who might be thinking there’s been a lot of work in three months, I agree. My great relaxation is often found tinkering at a work bench and I still find it difficult to be idle for too long. Mike and Brooke are becoming great navigators, passage/trip planners and weather forecasters. So days motoring or motor sailing will often find them running the ship, with my head occasionally bobbing up from one or another hidey hole or work space like some alerted meer cat to say “where the F… are we guys?” I’m finding cruising is a total lifestyle change as the pressures associated with suburban living seem to be distant memories. We hope you continue to enjoy or blog as much as we are enjoying sharing our experiences with you.  

NB: we'd love to share with you what interests you most - so should there be more specific technical boat questions or perhaps the logistics and ins-and-outs of life afloat, please send us your questions. Otherwise if it's scenic travel photos you prefer - rest assured there will be plenty more of that to come!